CALCULATORS / BATTERIES AND ENERGY STORAGE

Battery current from load calculator

Constant-power DC load with supplied conversion efficiency.

batteries-load-current.napkin / editable

SCENARIO COMPARISON

Compare the numbers.

This source describes an analytical model. Its quantities and checks are the view.

Scenario	currentA
	9.25926
	7.40741

All calculated quantities are listed with the inputs. Switch to Source to inspect the equations.

SCENARIOS / CALCULATED VALUESSAME SOURCE

Change an input to see the consequences.

current budget9.26 A✓ passes

BASELINE INPUTS

power200 Wvoltage24 Vefficiency0.9

CALCULATED

current9.2593 A

Edits change the baseline source.

THE SOURCE

Edits below update the same model.

# Battery current from load
# Scope: Constant-power DC load with supplied conversion efficiency.
# Status: illustrative worked example; engineering review pending.
# Inputs are example values. Checks are editable example requirements, not standards.

power = 200 W
voltage = 24 V
efficiency = 0.9

current := power/(voltage*efficiency) [A]

check current budget: current <= 12 A

scenario alternative: power = 160 W

Calculated from your source · not saved

Baseline · Baseline

current budget9.26 A ✓ passes

alternative · alternative

current budget7.41 A ✓ passes

Illustrative first-order example. Checks are editable requirements, not design standards. The broader topic may require additional equations, data, and validation.

Formula and units

This example uses the following equations. Input names and units match the editable source above.

current: current = power/(voltage*efficiency) [A]

Original worked example

These are the baseline values in the downloadable source. Edits above let you test your own values.

Given

power: 200 W
voltage: 24 V
efficiency: 0.9

Calculated

current: 9.25926 A

Assumptions and limits

Constant-power DC load with supplied conversion efficiency.

The requirement checks use the limits written in this example. Passing a check does not establish that the model covers every load, material behavior, or operating condition in a real design.

Download this .napkin example ↓

Take it further with your agent

Napkin keeps the inputs, equations, checks and assumptions together in one study. Your agent sets it up; you change the numbers.

Try with Claude ↗

codex 'Use Napkin (https://napkin.engineering/mcp, or the local Napkin plugin) to build a study: Battery current from load. Inputs: output power; pack voltage range; converter efficiency. Outputs: current range; peak demand. Model scope: Cell/pack data and stated electrical and thermal conditions. Read napkin_capabilities and the current snapshot. Ask me for the values that matter, label assumptions with units, author .napkin source, validate it and apply it with napkin_source using the current revision, then open the study. Add checks for the limits I supply. Keep unsupported analyses explicit.'

Claude needs the Napkin connector; Codex needs the Napkin plugin. Set up your agent ↗

The broader study

The topic brief below describes the broader scope. The worked example above states the particular calculation it implements.

Inputs: output power, pack voltage range, converter efficiency
Outputs: current range, peak demand
Modes: calculate, compare, sweep
Drawing: Pack and energy-budget plot

EXECUTABLE WORKED EXAMPLE · FIRST-ORDER MODEL · CHECK THE SCOPE & ASSUMPTIONS